D-Link DSL-G604T User Manual page 31

WEP Settings in the Setup Wizard
WEP is disabled by default. To enable WEP, click the Enable radio
button. The menu will change to present additional settings to
configure the WEP keys.
To configure the WEP keys (or shared keys for authentication), select the Key Type (Hex or ASCII) the Key
Length (64, 128 or 256 bits) and type the keys of the appropriate length in the 4 spaces provided. Click one of
the radio buttons (Key 1 – Key 4) to select the active key.
Click the Next button to proceed to the final step.
For a more complete description of Keys read the discussion of wireless LAN security in the next chapter.
DSL-G604T Wireless ADSL Router User's Guide
Note
28
The SSID can be a
continuous character
string (i.e. no spaces)
of up to 16 characters
in length.