Panasonic WJ-HD309A Network Set Instructions page 99

Setup items
I FTP Server Address
Enter an address or name (up to 255 characters) of the
FTP server that receives images. To enter an FTP serv-
er name, it is necessary to select "MANUAL" or "AUTO"
for "DNS".
I User Name
Enter a user name (login name) to access the FTP serv-
er.
Enter up to 32 alphanumeric characters.
The available characters are the characters listed below
except (&).
I User Password
It is necessary to register a password when sending
images to the FTP server. Enter up to 32 alphanumeric
characters.
The available characters are the characters listed below
except (&).
Entered character for the password will be displayed as
"*".
I Mode
Select an action mode for sending images to the FTP
server. Change to "PASSIVE" when sending images is
difficult with "SEQUENTIAL".
Ftp send by periodic timer
Perform the following settings to periodically send
recorded images. Perform the settings to determine
whether or not to send recorded images to the FTP
server using the timetable (page 69).
I Server Directory
Enter a directory of the server. Enter up to 32 alphanu-
meric characters.
The available characters are the characters listed below
except (& * : < > ? \ | ~).
I File Name
Perform the settings for the rules about the file name to
be sent.
Select whether to "Use the time and date as a file
name" or "Use a number as a file name".
I Interval
Enter a number (1 - 1 440) for transmission interval, and
select whether it will be "s" (seconds) or "m" (minutes)
for the interval unit.
I Channel to Send
CAM 1-16: Select a camera channel from which images
will be sent periodically.
Images from the checked camera channel will be sent
to the FTP server.
Ftp send by alarm
Perform the following settings to send images recorded
in the location where an alarm occurred. Perform the
settings to determine whether or not to send images
recorded in the location where an alarm occurred to the
FTP server using the event program (page 68).
I Server Directory
Enter a directory of the server. Enter a case-sensitive
directory name. Enter up to 32 alphanumeric charac-
ters.
The available characters are the characters listed below
except (& * : < > ? \ | ~).
I Duration-Pre
Select the duration of the images recorded by pre-event
recording to be transmitted from the following.
OFF/1 s - 10 s (in 1 second intervals)
Important:
Images recorded by pre-event recording will not be
transmitted when pre-event recording is not to be
performed. Perform pre-event recording to transmit
images recorded by pre-event recording. Refer to
page 64 for further information about pre-event
recording settings.
99