Panasonic WJ-HD309A Network Set Instructions page 91

Setup items
I Unit Address (System)
A unit address is a unique number to be assigned to
each device. Each address of system devices must be
unique to identify them when connecting two or more
system devices. For instance, numbers "001" - "099"
are assigned to unit addresses for system devices.
I Baud Rate
Select a communication speed for data transmission
with a connected device from the following.
9 600/19 200/38 400 bps
I Data Bit
Select a data length for communication from the follow-
ing.
7/8 bit
I Parity
Select a method of error check for a transmission at
communication from the following.
NONE: No parity check
EVEN: Even parity
ODD: Odd parity
I Stop Bit
Select a stop bit from the following.
1/2 bit
I
Retry Timing
Select an interval for retrying when the data reception is
not confirmed from the following.
OFF/100 ms/200 ms/400 ms/1 000 ms
91