Network Connection And Settings - Samsung SMARTCAM SNH-V6414BN User Manual

Network Connection and Settings

precautions
• The wireless network access may fail, depending on the communications
environment.
• For details about the network settings and password, contact your network
administrator or service provider.
• For a specific Internet service requiring user authentication, you may not access
the service. If this is the case, contact the service provider.
• Do not access the unauthorized network.
• The farther the distance from the Wireless Access Point, the longer time the
network connection may take.
• If you fail to access the selected wireless network, try a different Wireless
Access Point to make access.
• For more information about the router or the wireless connection, refer to the
documentation of the router or contact the router manufacturer.
• If the camera is connected to a multiple-Wireless Access Point network
environment, some video packets may be lost, depending on the network traffic
load.
• According to the network policy (blocking UDP) of the service provider, the video
transmission can be limited to 7 minutes.
For more details, refer to the descriptions on page 16, <Relay Mode>.
• In addition to the above two situations, you may encounter a network delay or
interruption due to the network conditions.
• Some hubs can have compatibility issues.
10 · English
Connection using the wi-Fi Direct function
What is Wi-Fi Direct?
Using Wi-Fi Direct, you can easily connect your camera to a router without a
cable.
When the power is connected, the power status LED lights up in red and
1.
starts blinking when boot-up is complete.
When you press the Wi-Fi Direct button on the rear side of the camera, the
2.
LED color changes to yellow/light green.
Wi-Fi Direct Button
<Wireless Router>
Register and select a camera, referring to the instructions in the mobile guide.
3.
While the camera is connected to the server, status LED remains green.
4.
Set up the wireless network environment in accordance with the <network>
5.
guidance on page. 19.
The camera can only be registered via mobile.
`
n
You can connect in relay mode if the router doesn't have UPnP.
`
Configuration may differ depending on the router model. Please refer to the router
manual.
Please contact the service provider if you have difficulty connecting to the Internet.
`
Mobile