Table of Contents
Advertisement
Other Transmission Features
Programming the Label Insertion
A Press [Programed Name] in "La-
bel Insertion".
Note
❒ Press [OFF] if you do not
want to insert a destination.
Programming the Stamp Sender
Name
A Press [Change].
B Press the name of the user to be
4
stamped, and then press [OK].
Note
❒ The set user name is dis-
played when the user code
has been stored. See the Gen-
eral Settings Guide.
❒ You can switch titles by
pressing the title keys.
❒ To stamp a non-registered
user name, press [Non-pro-
gramed Name], and then enter
the user name.
❒ If you do not want to stamp
the sender's stamp, press [No
Stamp].
70
Programming the Reduced
Image Transmission
A Press [ON] in "Reduced Image
TX".
Note
❒ Press [OFF] if you do not
want to do a reduced trans-
mission.
Programming the Auto Reduce
A Press [ON] in "Auto Reduce".
Note
❒ Press [OFF] if you do not
want to use the Auto Reduce
function.
Programming the Default ID
Transmission
A Press [ON] in "Default ID TX".
Note
❒ Press [OFF] if you do not
want to use ID transmission.
E E E E
Press [OK] twice.
F F F F
Set the destination, and then
press the { { { { Start} } } } key.
Advertisement
Table of Contents
