Table of Contents
Advertisement
S
O
CANNER
PERATION
B
O
EEPER
PTIONS AND
Changing the Beeper Tone
Beeper tones may be configured incrementally using the following bar code. The new tone will be heard followed by a short
pause. Two more new tones will be heard signifying the new setting has been stored in memory. The silent (no beep) tone is
also selectable.
N
³
9 9 9 9 7 5
Changing the Beeper Volume
Volume levels may be configured using the volume button or incrementally using the following bar code. The new volume will
be heard followed by a short pause. Two more tones will be heard signifying the new setting has been saved in memory.
The silent (no volume) tone is also selectable.
The Multi-Function Button
Figure 34. Changing the Beeper Volume
Figure 35. Laser & Motor Off
Power Save Move
Figure 36. Normal Operation
B
F
UTTON
UNCTIONS
Figure 33. The Multi-Function Volume Button
Changing the Beeper Volume
A short (<3 second) depression and the beeper volume will change.
The new volume will be heard. The silent (no beep) volume is also selectable.
Placing the Unit in Laser & Motor Off Power Save Mode
Long (>3 seconds) depression The Laser & Motor Off Power Save Mode is the only
power save mode that can be activated with the multi-function button*.
*
This feature is configuration dependent. Refer to the MetroSelect Configuration Guide
(
00-02407x) under Scanner Operation: Power Save Modes to enable this feature.
PN
Waking the Unit from All Power Save Modes
The next button depression will awaken the scanner for normal operation.
N
³
9 9 9 9 7 4
33
Advertisement
Table of Contents
