Settings (Sw1 - Samsung SCP-3120V User Manual

installing your camera
COMMUNICATION PROTOCOL DIP SWITCH
SETTINGS (SW2)
*
Coaxial communication automatically detects signals, and so does not require a
separate communication setup process.
ON
ON
OFF
SW2
❖
Protocol Settings
Select a communication protocol for the camera
No Protocol SW2-#1
1 AUTO DETECT OFF
2 Samsung-T OFF
3 Pelco-D OFF
4 Pelco-P OFF
5 Samsung-E OFF
6 Panasonic OFF
7 Vicon OFF
8 Honeywell OFF
9 AD ON
10 GE ON
11 BOSCH ON
12 Reserved ON
13 Reserved ON
14 Reserved ON
15 Reserved ON
16 Reserved ON
❖
Baud Rate Settings
Select the transfer speed of a selected communication protocol.
No. Baud Rate(BPS)
2,400
1
4,800
2
9,600
3
19,200
4
20_ installing your camera
SW2 Pin No. Purpose
1~4 Protocol Settings
5~6 Baud Rate Settings
7 Response Mode Settings
8 Termination Settings
SW2-#2 SW2-#3 SW2-#4
OFF OFF OFF
OFF OFF ON
OFF ON OFF
OFF ON ON
ON OFF OFF
ON OFF ON
ON ON OFF
ON ON ON
OFF OFF OFF
OFF OFF ON
OFF ON OFF
OFF ON ON
ON OFF OFF
ON OFF ON
ON ON OFF
ON ON ON
SW2-#5 SW2-#6
ON ON
ON OFF
OFF OFF
OFF ON
❖
Communication Response Settings
Select a communication response method for the camera and controller: Response or
No Response.
Function
SW2- #7 Response Mode Switch
❖
Termination Settings
To prevent the attenuation of communication signals between the camera and
controller, the items at the end of line must be set up with the termination settings.
Camera Input Position
Termination of Longest Path
On the Path
*
This model is provided with factory defaults of all DIP switches set to OFF. The default
settings are shaded in the table.
M 
To use a third party controller with this product, please contact our After-Sales Service
or Technology Department.

Controls Using Different Protocols
AD Protocol
Entering Camera OSD 3+Auxilary ON
Exiting Camera OSD 3+Auxilary OFF
ENTER IRIS OPEN
ESC IRIS CLOSE
Control with the SSC-5000 Controller
Protocol
Samsung-T
Samsung-E Iris Open/Focus Far

Note that LCD monitor does not switch to OSD mode and the Joystick will not provide
Enter operation, when using the OSD menu with Samsung-E protocol.
CAMERA ID DIP SWITCH SETTINGS (SW1)
To set up camera IDs, refer to the "Camera ID Chart" next.
ON
SW1
ON OFF
Response No Response
SW2- #8
ON
OFF
VICON Protocol GE Protocol
IRIS OPEN IRIS OPEN
IRIS CLOSE IRIS CLOSE
IRIS OPEN IRIS OPEN
IRIS CLOSE IRIS CLOSE
Enter Esc
Focus Far Focus Near
Iris Open/Focus Near
ON
OFF
English _ 21
English