3-Way Calling; Put A Call On Hold; End A Call - HTC One User Manual

● Flash to accept another incoming call and put the first caller on hold. Touch Flash again
to talk to the first caller.
● People to display your contacts list.
● Contact card to display the caller's contact information.
Note: When the phone is completing a call, only the People and Flash are available.
You can also touch
speakerphone on or off, touch
button.
Warning: Because of higher volume levels, do not place the phone near your ear during
speakerphone use.

3-way Calling

With 3-Way Calling, you can talk to two people at the same time. When using this feature, the
normal airtime rates will be charged for each of the two calls.
1. Touch >
2. Dial a number and touch Call.
3. Once you have established the connection, touch
number. (This puts the first caller on hold and dials the second number.)
Tip: You can add a call even if the first call was an incoming call.
4. When you're connected to the second party, touch
If one of the people you called hangs up during your call, you and the remaining caller stay
connected. If you initiated the call and are the first to hang up, all callers are disconnected.
To end the three-way call, touch End call.

Put a Call On Hold

When Call Waiting is enabled on your phone, you can put a caller on hold to answer another
call.
To respond to an incoming call while you're on a call:
1. Touch > Flash. (This puts the first caller on hold and answers the second call.)
2. To switch back to the first caller, touch

End a Call

There are a couple of options for ending a phone call.
Phone Calls
to mute the microphone. Touch the button again to unmute. To turn the
. You can adjust the speaker volume by pressing the volume
.
> Add call, and dial the second
.
> Flash again.
45