Setting Radio Station Presets; Language — English/Metric - Cadillac 2006 DTS Manual

The information in the system may not always be
complete. Road conditions such as prohibited turns,
detours, and construction zones, change frequently. It is
important to consider whether you can follow the
directions given by the system for the current conditions.
Each time the vehicle is started and the navigation
system is turned on, the Caution screen will appear.
Touch OK to load the map DVD information. All
hard keys except for the NAV (Navigation) and DEST
(Destination) hard keys can be accessed, if OK is
not selected. Once the NAV or DEST hard keys are
pressed, this Caution screen will appear and OK
will have to be pressed to load the map DVD
information.
1-6
When getting started you may set the navigation system
to your preference using various options. To do so,
reference the following topics:
Language — English/Metric
To change the language of the navigation screens, see
"Driver Information Center, DIC Vehicle Personalization"
in the Index of your vehicles owner manual.
To change English and metric on the navigation screens,
see "Driver Information Center, DIC Controls and
Displays" in the Index of your vehicles owner manual.

Setting Radio Station Presets

To set preset radio stations, do the following:
1. Press the power/volume knob to turn the
system on.
2. Press the AUDIO hard key and select the desired
band (AM, FM1, FM2, XM1, or XM2 (if equipped)).
3. Use the tuning knob or the SEEK arrows to tune to
the desired station.
4. Press and hold one of the six preset screen
buttons, at the bottom of the screen, until you hear
a beep or see the station displayed on the
selected preset button.
5. Repeat the steps for each preset.
See "Storing Preset Stations" under Navigation Audio
System on page 3-2 for more information.