Advertisement
Installation
1. Select a suitable mounting Location :
A. Close enough to a 12 volt DC power source.
B. Do not expose to extreme temperatures or moisture.
Then install the system using the brackets, screws and washers provided
as shown in figure #1. Temporarily mount the brackets to the unit. Use
the unit with brackets mounted as a template to mark the holes that are
to be drilled.
CAUTION : When drilling hole, be sure that you are not interfering
with any electrical wiring.
After marking location of drilling, carefully drill small, shallow holes. Then secure
amplifier's brackets to mounting location. After the brackets are secure, mount
amplifier into brackets. Refer to Figure #1.
2. Mount the MIC. Bracket refering to figure #2.
Figure #1
Figure #2
2
Advertisement
