Electronic Pilot Ignition Wiring; Remote Wall Switch - Majestic 300DVB Installation And Operating Instructions Manual

ELECTRICAL INSTALLATION

ELECTRONIC PILOT IGNITION WIRING

Electronic Valve
HI
EV1 EV2
RED #2
WHITE #3
15' Wall Switch Wire
B
LACK
WHITE

REMOTE WALL SWITCh

Position the wall switch. Do not extend beyond the 15 feet of wire.
OPTIONAL DC REMOTE SySTEMS
These instructions replace the section entitled Hearth Mount in the Millivolt hand held remote instructions supplied with
the remote.
1. Plug in remote connector wire to remote receiver.
2. Connect the wire terminal from the remote receiver. This replaces the 15' wall switch connection to the switch. See
Figure 37.
3. Mount remote control receiver at junction box (for your wall switch).
30
Do not connect 110-120 VAC to the
Remote Wall Switch. The appliance
will malfunction.
RED #2
GRAY #1
Figure 37 - Remote Wall Switch Wiring Diagram
Ignition Module
ON
OFF
RS
To Junction Box
Pilot Assembly
Spark
WHITE
Sense
WHITE
BLUE
YELLOW YELLOW
GREEN
BLACK
BLACK
Primary - 120V
Transformer
YELLOW
Secondary
24V
54D0701