Table of Contents
Advertisement
I V . B A T T E R I E S A N D C H A R G I N G
How do I change a battery in my scooter?
MANDATORY! Battery posts, terminals and related accessories contain lead and
lead compounds. Wear goggles and gloves when handling batteries and wash
hands after handling.
WARNING! Always use two batteries of the exact same type, chemistry and amp-
hour (Ah) capacity. Refer to the specifications table in this manual and in the
manual supplied with the battery charger for recommended type and capacities.
WARNING! Do not mix old and new batteries. Always replace both batteries at the
same time.
WARNING! Contact your authorised Pride Dealer if you have any questions regard-
ing the batteries in your scooter.
WARNING! Do not replace the batteries while the scooter is occupied.
WARNING! The batteries on your scooter should only be serviced or replaced by
an authorised Pride Dealer or a qualified technician.
PROHIBITED! Keep tools and other metal objects away from battery terminals.
Contact with tools can cause electrical shock.
You may need the following to change your batteries:
Metric/standard socket set and ratchet
Adjustable spanner
To change the batteries in your scooter:
WARNING! Do not lift beyond your physical capability. Ask for assistance when neces-
sary while disassembling or assembling your scooter.
1. Remove the seat by lifting it straight up and off of the scooter. If you encounter resistance when removing
the seat, disengage the seat rotation lever and swivel the seat back and forth while lifting up on the seat.
2. Remove the rear shroud by lifting it straight up and off the scooter. The shroud is secured to the scooter
with reusable fasteners and two thumbscrews. See figure 13.
REAR SHROUD
THUMBSCREW
Figure 13. Shroud Removal/Installation
26
THUMBSCREW
BATTERY SHROUD
www.pridemobility.com
BATTERY TERMINALS LOCATED
UNDER TERMINAL BOOTS
Figure 14. Battery Removal/Replacement
Colt Executive
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
