AMAX panel
5.5.7
Establishing a Direct Connection
4
Figure 5.7: Link – Selecting Direct Connect
1.
2.
P
Bosch Sicherheitssysteme GmbH
Select the Link index sheet to establish a connection between the A-Link Plus program
and the AMAX panel.
Select Direct Connect as communication model.
Click on the Connect button to connect to the AMAX panel.
If the connection is successful, the status changes to Connected and the AMAX panel
type and version is displayed.
Programming and Operating the AMAX System | en
Quick Start Manual
21
2015.05 | 05 | F.01U.309.297