Other Programming; Call Restriction - Panasonic KX-PRS120AZ Operating Instructions Manual

Other programming

Changing the handset name
Each handset can be given a customised
name ("Bob", "Kitchen", etc.). This is useful
when you make intercom calls between
handsets. You can also select whether or not
the handset name is displayed in standby
mode. The default setting is "No". If you select
"Yes" without entering any handset name,
"Handset 1" to "Handset 6" is displayed.
1
MMenuN (right soft key) #104
2
Enter the desired name (max. 10
characters).
3
MOKN
4
MbN: Select the desired setting. a MOKN
2 times a M
Storing an area code to be
deleted automatically
In some situations, phone numbers stored
automatically in the caller list (page 36) will
include area codes. If you do not want to dial
the area code when making calls from the
caller list, you can store the area code which
you want the unit to delete automatically.
Example: You have stored the area code
"09". If you make a call from the caller list to
the phone number "09-456-7890", the unit
dials "456-7890".
1
MMenuN (right soft key) #255
2
Enter an area code (5 digits max.). a
MOKN a M N
Note for New Zealand:
R The use of this feature can prevent a
National Call from being dialled. E.g., in the
case of the South Island, the "03" will be
omitted and will therefore prevent a
National Call to other areas of the South
Island.

Call restriction

You can restrict selected handsets from
dialling certain numbers. You can assign up to
PRS120AZ(en)_0724_ver012.pdf PRS120AZ(en)_0724_ver012.pdf
N
31 31
6 phone numbers to be restricted, and select
which handsets are to be restricted. Storing
area codes here prevents the restricted
handsets from dialling any phone number in
that area code.
1
MMenuN (right soft key) #256
2
Enter the base unit PIN (default: "0000").
R If you forget your PIN, contact an
authorised service centre.
3
Select the handsets to be restricted by
pressing 1 to 6.
R All handsets registered to the base unit
are displayed.
R " " is displayed next to the selected
handset numbers.
R To cancel a selected handset, press
the same dial key again. " "
disappears.
4
MOKN
5
Select a memory location by pressing 1
to 6. a MOKN
6
Enter the phone number or area code to
be restricted (8 digits max.). a MOKN a
M N
Changing the base unit PIN
Important:
R If you change the PIN (Personal
Identification Number), please make note of
your new PIN. The unit will not reveal the
PIN to you. If you forget your PIN, contact
an authorised service centre.
1
MMenuN (right soft key) #132
2
Enter the current 4-digit base unit PIN
(default: "0000").
3
Enter the new 4-digit base unit PIN. a
MOKN
4
MbN: "Yes" a MOKN a M
Changing the unit's region
setting/Resetting the base unit
1
MMenuN (right soft key) #136
2
MbN: Select the desired country. a MOKN
"Australia" = Australia
2013/07/24 2013/07/24 11:29:09 11:29:09
Programming
N
31