Adjusting The Set Speed; Canceling And Resuming The Constant Speed Control - Toyota 2016 Highlander Service Manual

Adjusting the set speed

To change the set speed, operate the lever until the desired set speed
is obtained.
1
Increases the speed
2
Decreases the speed
Fine adjustment:
move the lever in the desired direc-
tion.
Large adjustment: Hold the lever in
the desired direction.
The set speed will be increased or decreased as follows:
Fine adjustment: By approximately 1 mph (1.6 km/h) each time the lever is
operated.
Large adjustment: The set speed can be increased or decreased continu-
ally until the lever is released.

Canceling and resuming the constant speed control

1
Pulling the lever toward you
cancels the constant speed
control.
The speed setting is also canceled
when the brakes are applied.
2
Pushing the lever up resumes
the constant speed control.
Resuming is available when the
vehicle speed is more than approx-
imately 25 mph (40 km/h).
HIGHLANDER_U (OM48F09U)
4-5. Using the driving support systems
Momentarily
265
4