XR-CA430X
• This set can be disassembled in the order shown below.
2-1.
DISASSEMBLY FLOW
Note 1:
The process described in
Note 2:
Without completing the process described in
Note 3:
Illustration of disassembly is omitted.
Note: Follow the disassembly procedure in the numerical order given.
2-2.
COVER
8
SECTION 2
DISASSEMBLY
can be performed in any order.
SET
FRONT PANEL SECTION
(Note 3)
2-3. MECHANISM DECK (MG-25F-136)
(Page 9)
2-4. MAIN BOARD
(Page 9)
2-5. HEAT SINK
(Page 10)
, the next process can not be performed.
2-2. COVER
(Page 8)
1 screw
(PTT2.6 × 5)
2 cover