Automatic Time Limitation; Basic Settings - Bosch NIT8665UC Use And Care Manual

Automatic time limitation

Basic settings

The automatic time limitation function is activated if the element is used for
prolonged periods without any modifications being made.
The element stops heating.
r, i and the residual heat warning light t/s flash alternately on the element display.
The indicator goes out when any symbol is pressed. The element can now be reset.
When the automatic time limitation function is activated, this is controlled by the
selected heat setting (from 1 to 10 hours).
The cooktop offers various basic settings. Some of these settings can be modified.
o b
Permanent childproof lock
The cooktop is automatically locked once
switched off.
o c
Deactivating the beep
Short beep to confirm
that a symbol button has been pressed or
long beep
to warn that an incorrect operation has
been performed.
o f
element automatic OFF function
The element always switches off
automatically once the time set on the
timer has elapsed.
o g
Alarm duration of time programming
function
An alarm sounds once the period set on
the timer elapses or
after the time elapses for an area to be
automatically switched off.
o h
Power Management Function
This limits the total power
of the cooktop.
There are 17 setting levels.
Increasing the setting level
increases the power of the cooktop
by 500 W.
k childproof lock deactivated*
b childproof lock activated
k majority of beeps
deactivated
b some beeps
deactivated
c all beeps activated*
k automatic OFF
deactivated*
b minute = minimum time
jj minutes= maximum time
b 10 seconds
c 30 seconds
d 1 minute
b = 1000 W minimum power
b. - i. = from 1500 to 8500w
j = 9000W maximum power
25