D-Link DVG-6004S User Manual page 33

Hide thumbs Also See for DVG-6004S:
Table of Contents

Advertisement

DVG-6004S/6008S User's Manual
Enable P-Assert: This variable is for caller ID protection.
Privacy Type: Privacy type is used to disguise the caller ID when queried via an ITSP/Third-Party
Assertion.
SIP Message Resend Timer Base: SIP packet will resend if response did not arrive in the base time
set in this column. It will send again at "base time" * 2, and send again at "base time" *2 *2. The
maximum resend time is four seconds. Resend will stop and restart when the total resend time has
reached 20 seconds.
Max. Response Time for Invite: If the destination does not reply in the set time, the call is failed.
Invite URL need 'user=phone': There is 'user=phone' in invite packet.
Reliability of Provisional Responses: Provide information on the progress of the request processing
if selected.
Compact Form: It decreases the size of SIP header if selected.
SIP CallerId Obtaining: Defines from which part of the SIP packet will the gateway obtain caller ID.
There are several places where you can put your caller ID.
Remote-Party-Id Display Name: It is locate at SIP→Remote-Party-ID→Before [<sip:]
Remote-Party-Id User Name: It is locate at SIP → Remote-Party-ID → After [<sip:], Before [@]
From-Header Display Name: The standard way is in SIP → Message Header → From → SIP
Display info.
Support URI Percent-Encoding(RFC 3986): It follows RFC 3986 to encode/decode the letters of the
basic Latin alphabet, digits, and a few special characters.
Compare SIP 'To' Header for Transit Out: When FXO is called and the number of Request line and
"To" is different, the system will use the number of "To" to dial out. Please consult your Proxy Server
Provider or ITSP about the format of invite packet from Proxy.
Enable SIP 'Allow' Header: Check the box to comprise the information of "Allow" in the message
header of INVITE. Disable it if the call can't be connected.
Call Hold Compatible With RFC 2543: Check the box to comprise c=0.0.0.0 in SDP message to be
compatible with RFC2543.
D-Link Systems, Inc.
This Manual: http://www.manuallib.com/file/2602385
SIP
28

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvg-6008s

Table of Contents