Telephony Settings - D-Link DVG-6004S User Manual

DVG-6004S/6008S User's Manual

3-6 Telephony Settings

Prefix Number Rules
Trunk Dial Out Verify/ Trunk Dial Out Replace: VoIP gateway will check (verify) the dial out
prefix from dial out numbers and change (replace) the prefix to transit out through FXO port.
Example:
If you transit out with 01907123456, the system will transfer to 190601 907123456. If you transit out with
008621123456 the system will replace it with 190200 8621123456. The maximum digit is 40. In the example
is 13 digits.
Trunk Dial Out Deny: The system will deny the call with the leading number filled in this column.
D-Link Systems, Inc.
This Manual: http://www.manuallib.com/file/2602385
Trunk Incoming Prompt Voice: Select the greeting (must use the IVR 132 function to record a
voice file) when FXO receives an inbound call (transit in).
FXO Hunting VoIP call in option: To set FXO transit out to POTS mode. By using a fixed
number assigned in "FXO Hunting Default Dial-Out ". Or transit out with the number sent from
remote SIP UA when the VoIP call calls FXO hunting number.
FXO Hunting Default Dial-Out: To set FXO default dial-out number.
This will take effect as FXO Line VoIP call in option is set to Default Dial-Out. When some one
makes a call to this FXO port from Internet, it will dial to PSTN with that default number.
FXO Line VoIP call in options: To set FXO dial-out mode when the VoIP call indicates the FXO
extension number.
Caller Indicate Dial-Out: When someone makes a call to this FXO port from Internet, it will dial
to PSTN with the number assigned in SIP packet.
Default Dial-Out: When some one makes a call to this FXO port from Internet, it will dial to PSTN
with the number filled in "FXO Line Default Dial-Out".
Telephony Settings
21