Replacement - Radio Shack TRS-80 PT-210 Service Manual

Replacement of the Paper Cutter
I
1. Remove the Paper Lock Spring from the Head Shaft Lock E-ring.
2. Remove E-rings from both sides of the Holder Shaft and take out the Holder Shaft.
3. Separate the Lower Guide and the Paper Cutter.
Remove the Paper Lock Spring from the Paper Cutter and install it on the new Paper Cutter.
Figure 46.
5. Combine the upper Paper Cutter with the Lower Guideand install it
on
the Frame with the Holder
Shaft.
6. Hook the E-ring to the Holder Shaft.