Electrical Safety Rules - IVT BCH-1206 Instruction Manual

Hide thumbs Also See for BCH-1206:

Manual (69 pages)

Table Of Contents

Table of Contents

Available languages

Enlarged version

necessary, before using the machine. Serious injury

to the operator and to the bystanders could result if

there's a damage to the machine.

•

While operating the appliance, dress properly.

Do not wear loose clothing or jewelry that could

become caught by the moving parts of the unit.

Wear suitable working clothes, long trousers and

solid shoes. It is recommended that legs and feet

are covered, to protect from flying debris during

the operation. Do not operate the appliance when

barefoot or wearing open sandals. Long hair should

be tied back.

•

Keep handles dry clean and free from oil and

grease.

WARNING: Use personal protective

equipment!The safety device and the

personal protective equipment protect

your own health and the health of others and

ensure trouble-free operation of the device.

•

Use safety glasses, safety gloves, solid non-skid

safety shoes and, if necessary, also an hardhat. Also

use a dust mask during pulverulent operations. If

the noise level exceeds 85 dB(A), ear protection is

obligatory.

WARNING! Some dust created by power sanding,

sawing grinding, drilling and other construction

activities contains chemicals known to cause

cancer, birth defeacts or other reproductive

harm. Some of these chemicals are: lead from

lead based paints, crystalline silica from bricks

and cement and other masonry produts, arsenic

and chromium from chemically treated lumber

and other dangerous products. Your risk for these

exposures varies, depending on how often you

do this type of work. To reduce your exposure

to these chemicals, any time you do pulverulent

operations, work in a well ventilated area and

work with approved safety equipment, such as

dust masks that are specially designed to filter out

microscopic particles.

•

Ensure that you have a good a stand, while you

operate with the device. Keep proper footing and

balance at all times.

•

Do not start the device if it is in an inverted

position or is not in the right working position.

•

Before use, all foreign bodies must be removed

from the working area where the appliance is going

to be used: remove all foreign objects, also pay

attention to foreign objects during the operation.

Keep work area clean. Cluttered areas invite

injuries.

•

Do not force the tool. It will do a better job and

operate more safety at the rate for which it was

intended.

•

Only work in daylight or sufficiently good

artificial light. Never operate the device without

good visibility.

•

Be careful not to drop the machine or hit it

against obstacles.

•

If the appliance strikes a foreign body, examine

the device for signs of damage and carry out any

necessary repairs before restarting and continuing

to work.

•

If the appliance starts to vibrate abnormally,

switch off the motor and check for the cause

immediately. Vibration is generally a warning of

trouble.

•

The appliance should be checked carefully

before use. You should only work with an appliance

that is in good condition. If you notice any defects on

the machine that may cause danger to the operator,

do not operate the appliance until all defects are

rectified.

•

Replace worn or damaged parts for safety. Use

only original spare parts. Parts not produced by

manufacturer may cause poor fit and possible

injury.

•

It is forbidden to move or modify any of the

electrical or mechanical devices.

•

Always switch off the appliance and wait until

the device completely stops whenever you leave the

machine, before carrying out maintenance, before

checking, cleaning or working on the appliance.

•

Use caution when cleaning or performing

maintenance on the appliance. Always make

adjustments after the unit is switched off and it's on

a flat, clear surface.

WARNING: Stay alert. Watch what you

are doing. Use common sense.