Dell S500 User Manual page 35

6
Power
7
Down / Keystone
adjustment
8
LAMP warning light
9
TEMP warning light
10 Enter
Turns the projector on or off. For more
information, see "Turning Your Projector On" on
page 29 and "Turning Your Projector Off" on
page 29.
Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to adjust image distortion caused by tilting
the projector (+40/-35 degrees).
If the LAMP amber indicator is on or blinking,
one of the following problems could be occurring:
• Lamp is reaching its end of usable life
• Lamp module is not properly installed
• Lamp driver failure
• Color wheel failure
For more information, see "Troubleshooting Your
Projector" on page 108 and "Guiding Signals" on
page 114.
If the TEMP amber indicator is on or blinking,
one of the following problems could be occurring:
• Internal temperature of the projector is too
high
• Color wheel failure
For more information, see "Troubleshooting Your
Projector" on page 108 and "Guiding Signals" on
page 114.
Press to confirm the selection item.
http://www.pureglare.com.au
Using Your Projector
35