Sanyo PLC-XF60A Service Manual page 46

Electrical Adjustments
⁄1 AV white balance adjustment-2
1
Set projector with 2-lamp mode.
2
Receive the 50% whole-white component signal with
INPUT 2 [Y/Cb/Cr] mode.
3
Enter the service mode and select group no. "
4
27
Select item no. " " (Green), "
and change data values respectively to make a proper
white balance.
⁄2 White balance adjustment (Lamp1)
Set projector with 1-lamp and Lamp 1 mode.
White balance adjustment-1
1
Receive the 100% whole-white component signal with
INPUT 2 [Y/Cb/Cr] mode.
2
Enter the service mode and select group no. "
3
24
Select item no. " " (Green), "
and change data values respectively to make a proper
white balance.
White balance adjustment-2 (AV)
1
Receive the 50% whole-white component signal with
INPUT 2 [Y/Cb/Cr] mode.
2
Enter the service mode and select group no. "
3
27
Select item no. " " (Green), "
and change data values respectively to make a proper
white balance.
White balance adjustment-3 (PC)
1
Receive the 50% whole-white computer signal with IN-
PUT 2 [RGB] mode.
2
Enter the service mode and select group no. "
3
27
Select item no. " " (Green), "
and change data values respectively to make a proper
white balance.
Confirm that the same white balance is obtained in the
all of input mode.
210
".
28 29
" (Red) or " " (Blue),
211
".
25 26
" (Red) or " " (Blue),
211
".
28 29
" (Red) or " " (Blue),
201
".
28 29
" (Red) or " " (Blue),
- 46 -
⁄3 White balance adjustment (Lamp2)
Set projector with 1-lamp and Lamp 2 mode.
White balance adjustment-1 (PC)
1
Receive the 50% whole-white computer signal with IN-
PUT 2 [RGB] mode.
2
Enter the service mode and select group no. "
3
27
Select item no. " " (Green), "
and change data values respectively to make a proper
white balance.
White balance adjustment-2 (AV)
1
Receive the 100% whole-white component signal with
INPUT 2 [Y/Cb/Cr] mode.
2
Enter the service mode and select group no. "
3
24
Select item no. " " (Green), "
and change data values respectively to make a proper
white balance.
White balance adjustment-3 (AV)
1
Receive the 50% whole-white component signal with
INPUT 2 [Y/Cb/Cr] mode.
2
Enter the service mode and select group no. "
3
27
Select item no. " " (Green), "
and change data values respectively to make a proper
white balance.
Confirm that the same white balance is obtained in the
all of input mode.
⁄4 White uniformity adjustment
The color shading correction adjustment performed with
a color management software included in the CD-ROM
supplied with the product. Please see the manual for fur-
ther information such as installation and adjustments.
REAL COLOR MANAGER PRO ver. 1.0
Instruction Manual
Part No. : 610 319 5346
202
".
28 29
" (Red) or " " (Blue),
212
".
25 26
" (Red) or " " (Blue),
212
".
28 29
" (Red) or " " (Blue),
CD-ROM
645 072 1120