Table of Contents
Advertisement
7.
INSTALL LIGHT BULBS
Install two shielded Halogen Bulbs (120 V, 50 W max., MR16 or PAR16 with GU10 base, not
included).
Do not touch lamps during or soon after operation. Burns may occur. In order to prevent
the risk of personal injury, only install shielded halogen lamps. Also, never install a cool
beam, a dichroic lamp, a lamp not suitable for use in recessed luminaires or identified for
use in enclosed fixtures.
1. Install the bulbs by placing the bulb leads into
their grooves in the socket.
2. Gently push upwards and turn clockwise until
secure.
NOTE: The Suction Cup Tool (included with
hood) can be used to install and remove
light bulbs. Press suction cup tool on
bulb and rotate counterclockwise to
remove bulb or clockwise to install bulb.
Most GU10 LED replacement bulbs commonly found in the market are not designed for
use in range hoods and might not perform as advertised. Their usage with this product is
not recommended.
8. INSTALL FILTERS
DUCTED INSTALLATION ONLY: Re-install aluminum filters removed in Step 2.
NON-DUCTED INSTALLATION ONLY: Install non-ducted filters - purchased and assembled in
Step 4 on page 8.
9. OPERATION
Always turn your hood on before you begin cooking to establish an air flow in the kitchen.
Let the blower run for a few minutes to clear the air after you turn off the range. This will help keep
the whole kitchen cleaner and brighter.
Operate the hood as follows:
FAN SWITCH
I
Turns fan on to LOW speed.
•
Turns fan OFF.
II
Turns fan on to HIGH speed.
WARNING
!
SUCTION
CUP TOOL
CAUTION
I
•
II
10
LIGHT SWITCH
Turns light on to LOW intensity.
Turns light OFF.
Turns light on to HIGH intensity.
Hide quick links:
Advertisement
Table of Contents
