Verifying The Driver Installation On Windows - TRENDnet TU2-ET100 User Manual

TRENDnet User's Guide
4. Click Install.
5. Click Finish.
6. Remove the CD-ROM from your computer's CD-ROM drive.
7. Connect the adapter to an available USB port on your computer
© Copyright 2012 TRENDnet. All Rights Reserved.
8. The adapter's drivers will install automatically.
9. Connect a network cable from the TU2-ET100 to a switch, router or cable/DSL
modem.

Verifying the Driver Installation on Windows

To verify the driver installation on your Ethernet adapter, please launch
Device Manager through the steps below.
On Windows® 7/Vista: Right-click on the Computer icon on the desktop and

select Properties > Device Manager.
On Windows® XP: Right-click on the My Computer icon on the desktop and

select Properties > System > (Hardware) > Device Manager.
TU2-ET100
6