Verifying The Driver Installation On Mac - TRENDnet TU2-ET100 User Manual

TRENDnet User's Guide
8. Please note that the computer will be restart once the installation is completed.
Please click on Continue Installation to continue the installation.
9. Click Restart to activate the new settings.
© Copyright 2012 TRENDnet. All Rights Reserved.
The installation is now completed. Please connect the TU2-ET100 adapter to a
network device via a Network cable:
1. Connect an Ethernet cable to the Ethernet port on the TU2-ET100 adapter.
2. Connect the other end of the Ethernet cable to your network hub, switch or
router.
The Link LED on the TU2-ET100 should light up in green to indicate a proper physical
connection between the TU2-ET100 adapter and the network. If the Link LED doesn't
light up, please verify the cable connection between all the network devices.

Verifying the Driver Installation on Mac

Once you finish the installation of Ethernet Adapter, please navigate to System
Profiler>Hardware>USB, then you will find the driver of AX88772.
TU2-ET100
13