Yamaha RX-S601 Owner's Manual page 86

Menu Item
DSP Parameter
Lipsync
Sound
Volume
Auto Power Standby
ECO
ECO Mode
Input Rename
Input Skip
Dimmer
Function
Memory Guard
Remote Color Key
Party Mode Set
Information
Network Connection
IP Address
MAC Address Filter
Network
DMC Control
Network Standby
Network Name
Network Update
Function
CINEMA DSP 3D Mode Enables/disables CINEMA DSP 3D.
Panorama Enables/disables the broadening effect of the front sound field.
Center Width Adjusts the broadening effect of the center sound field.
Dimension Adjusts the difference in level between the front and surround sound fields.
Center Image Adjusts the center orientation level (broadening effect) of the front sound field.
Select Selects the method to adjust the delay between video and audio output.
Adjustment Adjusts the delay between video and audio output manually.
Scale Switches the scale of the volume display.
Dynamic Range Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback.
Main Zone Max Volume Sets the main zone maximum volume to prevent excessive loudness.
Main Zone Initial Volume Sets the main zone initial volume when the unit is turned on.
Zone2 Max Volume Sets the Zone2 maximum volume to prevent excessive loudness.
Zone2 Initial Volume Sets the Zone2 initial volume when the Zone2 output is enabled.
Set the amount of time for the auto-standby function.
Enables/disables the eco mode (power saving mode).
Changes the input source name displayed on the front display.
Set which input source is skipped when operating the INPUT knob on the front panel.
Adjusts the brightness of the front display.
Prevents accidental changes to the settings.
Set the unit's functions for the RED/GREEN/YELLOW/BLUE key of the remote control.
Enables/disables switching to the party mode.
Displays the network information on the unit.
Selects the network connection method.
Configures the network parameters (such as IP address).
Sets the MAC address filter to limit access to the unit from other network devices.
Selects whether to allow a DLNA-compatible Digital Media Controller (DMC) to control playback.
Selects whether to enable/disable the function that turns on the unit from other network devices.
Edits the network name (the unit's name on the network) displayed on other network devices.
Updates the firmware via the network.
86
En
Page
93
93
93
93
93
94
94
94
94
94
94
95
95
96
96
97
97
97
97
98
98
99
99
99
100
100
100
100
101