Data Output - Sartorius la series Operating Instructions Manual

To select a parameter:
Press Q or q repeatedly until
the desired setting is selected
(displayed inversely)
Confirm your selection by pressing
the soft key
l
To change the numeric value
of a parameter:
Press Q or q repeatedly until
the desired setting is selected
(displayed inversely)
Enter the desired number using the
1 2 ... 0 . keys
Confirm your selection by pressing
the soft key
l
To return to the Setup/Select level:
Press the oo soft key
See the chapter entitled "Configuring
the Balance" for a complete
description of all parameters.
To save the parameter settings and
exit the Setup menu:
press the soft key
oo
To cancel the parameter setting
operation: press e
6

Data Output

pro
Your Master balance is equipped
with an interface port for connecting
your choice of the following:
– Printer
– Peripheral device (e.g., computer)
– Universal remote control switch
Printer
You can configure the print functions
to meet your individual requirements
by selecting the corresponding
menu code.
You can have printouts generated
automatically, or by pressing p;
dependent on or independent
of the stability or time parameters;
with or without IDs; and as standard
or ISO/GLP-compliant printouts.
ISO: International Organization
for Standardization
GLP: Good Laboratory Practice
See the section on "Data Output
Functions" in the chapter entitled
"Operating the Balance" for
a detailed description of data
output options.
Interface Port
Instead of a printer, you may choose
to connect a different peripheral
device, e.g. a computer (PC). With
an on-line PC you can control both
the weighing cell and the display unit
pro
of the Master balance.
Request messages are sent via the
interface to initiate functions in the
weighing cell and in the display unit.
Some of the functions generate
response messages.
See the chapter entitled "Operating
the Balance" under the section on
"Data Output" for a detailed
description of the interface port.
Error Codes
If you press a key that has no function,
or which is blocked at a certain point
in an application program, this error
is indicated as follows:
– a double-beep is sounded as
an acoustic signal if the key has
no function
– a double-beep is sounded and a
message is displayed for 2 seconds
in the text line if the key function
is not available at that time
The response to an operator error
is identical in all models of the
pro
Master series. See the chapter
entitled "Error Codes" for a detailed
description.
Storing Settings
Storing Parameter Settings
The settings configured are stored
in the balance's non-volatile memory.
The most recent parameter settings
are active when you switch on
the balance.
Saving Parameter Settings
You can assign passwords in order
to block access to:
– printing function
Config
– the application menu
App
– the balance operating menu
and
Menu
– user data input functions
Input