Counting - Sartorius la series Operating Instructions Manual

Counting

A
Purpose
With the Counting program you
can determine the number of pieces
of approximately equal weight.
You can use this application program
in combination with a program
chosen from Application 2
(checkweighing, time-controlled
functions) and one from Application
3 (totalizing, formulation, statistics)
as well as with the extra functions.
50
Features
– Optional balance configuration in
Setup for automatically initializing
this application and loading the
most recent reference sample
quantity "nRef" and average piece
weight "wRef" when you switch on
the balance (this is the automatic
setting when the balance is
initialized; Setup menu:
Application parameters: Auto-start
app. when power goes on: On)
– Reference sample quantity "nRef"
entered manually
– Average piece weight "wRef"
entered manually
– Storage of the current weight
value for the preset reference
sample quantity "nRef", to
be loaded when the Counting
program is initialized
– Setting the accuracy when the
reference sample weight
"wRef" is stored for calculating
a piece count
– Automatic output of the quantity
and sample weight via the data
interface port after initialization or
reference sample updating while
running the Counting program
(Select Setup: App: Basic settings:
Printout configuration: Auto print
upon initialization: All values)
– Toggling between piece count
and weight value by pressing the
or soft key
Count. Weigh.
– Toggling between counting and
additional applications using
the D key (for example, check-
weighing)
Factory Settings
Accuracy when calculating piece
weight:
Display accuracy
Reference sample updating:
Automatic
Soft Key Functions
Store value input
nRef
as reference sample
quantity
Store input value
wRef
as reference sample
weight
Reference updating
Opt.
criteria met; reference
updating can be
performed
Toggle to the Counting
Count.
application