JVC KD-NX5000 Instructions Manual page 95

Menu items
Beep
Telephone Muting
Reverse Polarization
Connection *14
EQ
Fader/Balance
Fader/Balance
L02
Volume Adjust
Subwoofer
*13 The TEL MUTING lead connection is required. (☞ Installation/Connection Manual)
*14 This shows the same information as Connection in the Information Menu (☞ [43]).
Selectable settings
Off: Cancels.
On: Activates the key-touch tone.
You can mute the sound of the System (AV source sounds
and voice guidance) while you talk on the mobile phone.
Off: Cancels.
Muting1, Muting2: Select either one which mute the
sounds while using the mobile phone.
Select either of the two which indicates your gear direction
correctly.
GND, Battery
You can check the connection status.
Flat, Hard Rock, R&B, Pop, Jazz, Dance Music,
Country, Reggae, Classic, User 1, User 2,
User 3 ☞ [98]
Adjust fader—speaker output balance between the front
and rear speakers. (00)
F06: front only
R06: rear only
F02
• When using a two-speaker system, set the fader to the
centre (00).
Exit
Adjust balance—speaker output balance between the left
and right speakers. (00)
L06: left only
R06: right only
Adjust and store auto-adjustment volume level for each
source, comparing to the FM volume level. The volume
level will automatically increase or decrease when you
change the source.
–12 to +12 (00)
Adjust the settings below in the submenu:
• Phase: Subwoofer phase. Select either Normal or
Reverse, which reproduces a better sound.
• Level: Subwoofer output level. 00 to 08 (04)
(Initial setting)
*13
95
AV Menu items