Selecting Preset Stations; When An Fm Stereo Broadcast Is Hard To Receive; Tuning In To Stations With Sufficient Signal Strength - JVC KD-NX5000 Instructions Manual

4
Select a preset number.
[Hold]
You can also access the Preset List through
AV Menu ] List.

Selecting preset stations

On the remote:
1
2
Select a preset number.
From the Preset List
1
Display the Preset List.
or
[Hold]
• For FM only: Each time you press and
hold the button, you can change the
bands.
2
Select a preset number.
FM1 Preset4 Classic
P
T
Y
Station name
92.5
10:35
AM
FM1 Preset4 P Classic
T
Y
Station name
92.5
10:35
AM
FM1 Preset Store
1 87.5 MHz
2 88.3 MHz
3 88.7 MHz
4 91.5 MHz
5 93.1 MHz
6 95.3 MHz
When an FM stereo broadcast is hard
to receive
1
2
AV Menu
MHz
]Mode
]Mono
80
km/h
]On
3
lights up. Reception improves, but stereo
effect will be lost.
To restore stereo effect, select Off in step
Tuning in to stations with sufficient
signal strength
MHz
This function works only for FM bands.
Once you have activated this function (selected
80
Local), it always works when searching for FM
km/h
stations.
1
2
AV Menu
]Mode
]DX/Local
]Local
3
lights up. Only stations with sufficient
signal strength will be detected.
To tune in to all receivable stations again,
select DX in step
2
.
Listening to the radio
2
.
53