JVC KD-NX5000 Instructions Manual page 111

Symptoms
• No DAB Signal appears on the
monitor.
• Reset 08 appears on the monitor.
• The DAB tuner does not work at all.
• Antenna Power NG appears on the
monitor.
• Disc can be neither recognized nor
played.
• Disc cannot be ejected.
• Recordable/Rewritable discs cannot be
played back.
• Tracks on the Recordable/Rewritable
discs cannot be skipped.
• Not Support appears on the monitor. The format of the disc is supported.
• Disc Error appears on the monitor.
• Eject Error or Loading Error
appears on the monitor.
• Sound and pictures are sometimes
interrupted or distorted.
• No playback picture appears on the
monitor.
• No sound is heard while playing back a
DVD Audio.
• Region Code Error appears on the
monitor when you insert a DVD Video.
Causes/Remedies
Move to an area with stronger signals.
Connect this unit and the DAB tuner correctly,
then reset the unit (☞ [4]).
Reconnect this unit and the DAB tuner correctly.
Then, reset the unit (☞ [4]).
Check the cords and connections.
Eject the disc forcibly (☞ [4]).
Unlock the disc (☞ [65]).
• Insert a finalized disc.
• Finalize the discs with the component which
you used for recording.
Insert the disc correctly again.
The player may have malfunctioned. Eject the disc
forcibly.
• Stop playback while driving on rough roads.
• Change the disc.
Parking brake wire is not connected properly. (☞
Installation/Connection Manual.)
Some DVD Audios prohibit downmixed output.
When you play back such a disc, the unit plays
back the right front and left front signals only.
Region code is not correct (☞ [61]).
111
Troubleshooting