Air Flow; Initial Startup; Quick Chill; Oled Electronic Control Display - U-Line U-3018RFOL-00 Service Manual

Modular 3000 series
Hide thumbs Also See for U-3018RFOL-00:
Table of Contents

Advertisement

Air Flow

IMPORTANT
IMPORTANT
The unit requires proper air flow to perform at its highest
efficiency. Do not block the front grille, internal fans or vents
at any time, or the unit will not perform as expected. Do not
install the unit behind a door.
Door Removed For Illustration Purposes
Internal Air Flow And Unit Ventilation Diagram

Initial Startup

All U-Line controls are preset at the factory. Initial startup requires
no adjustments.
IMPORTANT
IMPORTANT
U-Line recommends allowing the unit to run overnight
before loading refrigerator with product.
To power the unit on simply press POWER
immediately switch on. To turn the unit off, press and hold POWER
for 5 seconds and release. The display will show a countdown to
switching the unit off.

OLED Electronic Control Display

Digital Display.
The 3000 Series units are controlled by a feature rich, advanced
OLED display control unit. The control panel allows adjustment to
temperature set point, access to Energy Saver Mode, internal
temperature readings, and many other features.

Adjusting Temperature Settings

Each zone has a series of Mode Settings with a default value for each
mode. Each mode setting can be further customized by fine tuning
the temperature set point. See the table below for a description of
each mode and mode temperature ranges. Mode selection will vary
by model.
Available mode settings will vary with model.
1. Press Select
2. Pressing Select
3. Once you have selected your desired mode the default set

Quick Chill

Quick chill is designed to quickly pull warm beverages and
foods down to optimum storage temperature. It is
important to only initiate quick chill modes when the unit
has been fully loaded with warm product.
The following table lists modes which include the quick chill feature
and the time which quick chill will run.
and the unit will
U-Line Service
Mode Settings Chart
Setting
Default (°F)
Red Wine
55°
White Wine
50°
Sparkling Wine
45°
Beverage
38°
Market
38°
Root
50°
Pantry
42°
Deli
36°
to activate Mode Settings.
will cycle through each available mode.
Reference the mode settings chart on pg 3 for each setting's
default set point and range.
temperature will display. You may further fine tune the
temperature by pressing Up
CAUTION
Mode
Beverage
Deli
Market
Pantry
Red Wine
Root
Sparkling
White Wine
General Information
Range (°F)
55° - 65°
45° - 55°
38° - 50°
34° - 65°
34° - 40°
45° - 55°
34° - 70°
34° - 40°
or Down
.
Run Time
4 Hours
5 Hours
4 Hours
4 Hours
Not Available
1 Hour
1 Hour
1 Hour
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents