Operating Instructions - Vizio VT420M Service Manual

42"LCD TV

2. Operating Instructions

2.1 The Use of Remote Control
Press to turn on/off the TV from or to standby mode
POWER:
Press to select TV/AV/Comp1/Comp2/ HDMI1/HDMI2/ HDMI3/HDMI
INPUT:
4/VGA/Photos/Music
Press to select TV input
TV:
Press to select AV input
AV:
Press to select COMPONENT1/ COMPONENT2 input
COMP:
Press to select HDMI1/HDMI2/ HDMI3/HDMI4 input
HDMI:
1. Press number button to direct access to TV channel
Number Key:
2. Press the pass code to activate the factory mode
3. Press to activate the Channel Lock (enter PIN code for Channel lock)
-
Use the button for digital channels.
Button :
Press to alternate between the currently viewed program and previously
LAST:
viewed program
INFO: To display information of currently channel/source.
1. Press repeatedly to select the signal source:
INPUT:
2. The Source List should be activated and show on OSD.
Press to adjust the volume
VOL +/ -:
Interrupt the sound or restore it.
MUTE :
Press to browse channels
CH +/ - :
Press to activate OSD menu and activate the setting/selection of OSD
MENU/SELECT:
Cursor Key: 1. Press button to navigate OSD menu
2. Cursor right key perform confirmation as well as proceed next level of OSD
Press button to active Picture In Picture function
PIP:
Press button to swap main/sub source of PIP.
SWAP:
Exit OSD
EXIT:
(Pause Live function use)Freeze the screen and start recording currently
PAUSE:
program.(Only work in DTV)
(Pause Live function use)Continue play program from pause point.
PLAY:
(Pause Live function use)Stop pause live function and back to live program.
STOP:
5
VT420M
.