Operating Instructions - Vizio VA320M Service Manual

32"LCD TV

2. Operating Instructions

2.1 The Use of Remote Control
POWER: Press to turn on/off the TV from or to standby mode.
INPUT: Press
HDMI3/HDMI 4/VGA/Photos/Music
TV: Press to select TV input
AV: Press to select AV input
COMP: Press to select COMPONENT1/ COMPONENT2 input
HDMI: Press to select HDMI1/HDMI2/ HDMI3/HDMI4 input
Number Key: 1. Press number button to direct access to TV channel
2. Press the pass code to activate the factory mode
3. Press to activate the Channel Lock (enter PIN code for
Channel lock)
- Button : Use the button for digital channels.
LAST: Press to alternate between the currently viewed program and
previously viewed program
INFO: To display information of currently channel/source.
INPUT: 1. Press repeatedly to select the signal source:
2. The Source List should be activated and show on OSD.
VOL +/ -: Press to adjust the volume
MUTE : Interrupt the sound or restore it.
CH +/ - : Press to browse channels
MENU/SELECT: Press to activate OSD menu and activate the setting/selection of
OSD
Cursor Key: 1. Press button to navigate OSD menu
2. Cursor right key perform confirmation as well as proceed next
level of OSD
PIP: TBD
SWAP: TBD
EXIT: Exit OSD
PAUSE: Freeze
program.(Onlywork in DTV)
PLAY: Continue play program from pause point.
STOP: TBD
5
to select TV/AV/Comp1/Comp2/
the screen and
VA320M
HDMI1/HDMI2/
start recording currently