Dell S6000–ON Configuration Manual page 1038

Hide thumbs Also See for S6000–ON:
Table of Contents

Advertisement

--
Stack Info
--
Unit
UnitType
Ports
--------------------------------------------------------------------------------
----
0
Management
1
Member
2
Member
3
Member
4
Member
5
Member
--
Power Supplies
Unit
Bay
Status
---------------------------------------------------------------------------
0
0
up
0
1
absent
--
Fan
Status
--
Unit Bay
TrayStatus
--------------------------------------------------------------------------------
----
0
0
up
0
1
up
0
2
absent
Speed in RPM
The following example shows the diag command (standalone unit).
Dell#diag stack-unit 1 level0
Warning - diagnostic execution will cause multiple link flaps on the peer side
- advisable to shut directly connected ports
Proceed with Diags [confirm yes/no]: yes
Dell#Dec 15 04:14:07: %S4820:0 %DIAGAGT-6-DA_DIAG_STARTED: Starting diags on
stack unit 1
00:12:10 : System may take additional time for Driver Init.
00:12:10 : Approximate time to complete the Diags ... 6 Mins
The following example shows the diag command (stack member).
[output from master unit]
Dell#diag stack-unit 2
Warning - the stack unit will be pulled out of the stack for diagnostic
execution
Proceed with Diags [confirm yes/no]: yes
Warning - diagnostic execution will cause multiple link flaps on the peer side
- advisable
to shut directly connected ports
Proceed with Diags [confirm yes/no]: yes
Dell#00:03:13: %S25P:2 %DIAGAGT-6-DA_DIAG_STARTED: Starting diags on stack unit
2
00:03:13 : Approximate time to complete these Diags ... 6 Min
00:03:13 : Diagnostic test results will be stored on stack unit 2 file: flash:/
TestReport-SU-2.txt
Dell#00:03:35: %STKUNIT1-M:CP %CHMGR-2-STACKUNIT_DOWN: Stack unit 2 down - card
removed
00:08:50: %STKUNIT1-M:CP %CHMGR-5-STACKUNITDETECTED: Stack unit 2 present
00:09:00: %STKUNIT1-M:CP %CHMGR-5-CHECKIN: Checkin from Stack unit 2 (type
1038
Status
ReqTyp
offline
S6000
not present
not present
not present
not present
not present
--
Type
FanStatus
AC
up
absent
Fan0
Speed
up
19275
up
19275
CurTyp
S6000
FanSpeed(rpm)
18048
0
Fan1
Speed
up
19275
up
19275
Version
9.4(0.0)
128
Debugging and Diagnostics

Advertisement

Table of Contents
loading

Table of Contents