Dell S6000–ON Configuration Manual page 1007

Hide thumbs Also See for S6000–ON:
Table of Contents

Advertisement

ip address ip—address mask
A non-default VRF named VRF-red is created and the interface is assigned to this VRF.
2.
Define a route-map export_ospfbgp_protocol.
Dell(config)route-map export_ospfbgp_protocol permit 10
3.
Define the matching criteria for the exported routes.
Dell(config-route-map)match source-protocol ospf
Dell(config-route-map)match source-protocol bgp
This action specifies that the route-map contains OSPF and BGP as the matching criteria for
exporting routes from vrf-red.
4.
Configure the export target in the source VRF with route-map export_ospfbgp_protocol.
ip route-export 1:1 export_ospfbgp_protocol
5.
Configure VRF-blue.
ip vrf vrf-blue
interface-type slot/port[/subport]
ip vrf forwarding VRF-blue
ip address ip—address mask
A non-default VRF named VRF-blue is created and the interface 1/22/1 is assigned to it.
6.
Define the route-map import_ospf_protocol.
Dell(config)route-map import_ospf_protocol permit 10
7.
Define the matching criteria for importing routes into VRF-blue.
Dell(config-route-map)match source-protocol ospf
This action specifies that the route-map contains OSPF as the matching criteria for importing routes
into vrf-blue.
8.
Configure the import target in VRF-blue with route-map import_ospf_protociol.
ip route-import 1:1 import_ospf_protocol
When you import routes into VRF-blue using the route-map import_ospf_protocol, only OSPF
routes are imported into VRF-blue. Even though VRF-red has leaked both OSPF as well as BGP routes
to be shared with other VRFs, this command imports only OSPF routes into VRF-blue.
9.
Configure the import target in the source VRF for reverse communnication with the destination VRF.
ip route-import 2:2
The show run output for the above configuration is as follows:
ip vrf vrf-Red
ip route-export
ip route-import
! this action exports only the OSPF and BGP routes to other VRFs
!
ip vrf vrf-Blue
ip route-export
ip route-import
!this action accepts only OSPF routes from VRF-red even though both OSPF as
well as BGP routes are shared
Virtual Routing and Forwarding (VRF)
1:1 export_ospfbgp_protocol
2:2
2:2
1:1 import_ospf_protocol
1007

Advertisement

Table of Contents
loading

Table of Contents