Panasonic KX-NS1000 User Manual page 331

Item
No DTMF Input Operation
No DTMF Input Operation
Wait Time
Personal Distribution List
Item
List 1–4 Members
Remote Call
Item
Remote Call Telephone
Number 1, 2 [0–9, *]
Specifies the operation taken when no DTMF input (a caller does not dial
anything) is received after the Personal Greeting:
•
Recording: The caller will be guided to leave a message.
•
Disconnect (All Day): The line will be disconnected, regardless of the
time of day.
•
Disconnect (Only After Hours): The line will be disconnected only after
hours.
Specifies the duration of time to wait for DTMF input before the action set in
No DTMF Input Operation is performed (0–10 s).
Personal Distribution Lists are used to send the same messages to several
mailboxes in a single operation. A maximum of 4 lists can be maintained with
each list containing a maximum of 40 mailboxes.
Specifies the mailbox numbers that belong to the list.
Follow the steps below to edit list members.
1.
Click Edit for a Personal Distribution List (1–4) Members item.
2.
Under Subscribers To Add, click the checkbox in No. for each mailbox
to add, referring to the mailbox numbers and mailbox owners' names.
3.
Click Add.
4.
Click OK.
Follow the steps below to remove members from a list.
1.
Click Edit for Personal Distribution Lists (1–4) Members item.
2.
Under Distribution, click the checkbox in No. for each mailbox to add,
referring to the mailbox numbers and mailbox owners' names.
3.
Click Delete.
4.
Click OK.
Specifies the telephone numbers of destinations to which callers are
forwarded when you set Remote Call Forwarding. 2 telephone numbers can
be specified per mailbox.
Make sure you begin the telephone number with an outside line access
number (to seize an outside line).
Note
This feature may be disabled by system programming for your mailbox.
3.2.1 User Programming
Description
Description
Description
User Manual 331