Panasonic KX-NS1000 User Manual page 125

For a called extension
To send a notification tone to the caller and join a conversation
PT/SLT/PS
Called Party
During an announcement
(DSS)
Press DSS
corresponding
to the caller.
OR
Press Recall/
hookswitch.
PT/PS
Caller
During an announcement
•
A maximum of 32 parties (including the caller) can join the conference. Also, depending on
system settings, a maximum of 32 parties (including the caller) can join the conversation.
• Push-to-Talk for PT/PS/SLT users
If the Broadcast Mode and this mode are selected through system programming, the called
PT/PS/SLT users can join the conversation by pressing any dial key (0–9,
voice announcement.
By assigning PSs with the Hands-free Answerback feature enabled to a conference group,
the caller can create a wireless paging system. All of the called PS users, with the Hands-free
Answerback feature enabled, will hear the voice announcement. Then, any PS user can
respond by pressing any dial key, and their reply will be heard by all of the called parties.
Join After Time Out
Extensions or outside telephones can join the multiple party conversation that has been already started using
this feature. For example, if the conference group members fail to answer when a conference group call is
made, they can join the multiple party conversation later using this feature. They can join the conversation from
outside telephones (through DISA or TIE Line) or extensions. This feature is available for both modes:
Conference Mode and Broadcast Mode.
Wait for reply.
A notification tone
occurs, and the display
shows the called party's
information.
1.7.3 Making a Conference Group Call
(DSS)
Press
corresponding
Talk.
DSS.
Introduce the called party to
the conversation.
Talk.
, #) during the
User Manual 125