Recording From Dv (Digital Camcorder) - LiteOn LVW-5025 Series User Manual

Recording from DV
(Digital Camcorder)
Important
• The DV-Link INPUT jack on this recorder is for
use with DV-compatible camcorders only.
• Only DV signals can be input to the DV-Link
jack on this DVD recorder.
• Do not connect a MICRO MV format video
camcorder to the DV-Link jack.
• Despite the technology endeavour with which
this DVD recorder is built, it is still likely that
your DV may not be fully supported by the
recorder. If you still experince problem using the
DV-Link for recording, please connect your DV
via S-Video or composite cables to this DVD
recorder.
Before you start...
1.
Check whether the DV is correctly connected
to the inputs of this recorder.
DV / Link
DV-Link
Camcoder
IEEE 1394
DV OUT
Recording with 'Rec Link'
The 'Rec Link' feature allows you to easily record
materials from DV with the recorder's remote
control. This function is automatically activated
when you connect your DV to the DVD recorder.
1
Press SETUP to display the Setup menu.
Press  to select 'Recording', then press 
to enter the sub-menu.
Press  to select a recording mode, then
press ENTER.
Guide to Recording Options (p.97)
2
When completed, press SETUP to exit the
Setup menu.
3
Press SOURCE repeatedly to select 'DV' as
the signal source.
Recording_02_05
The control pad will be displayed with the 'Rec Link' feature
enabled.
4
Press HDD/DVD to select your target medium.
If you would like to record on disc, press
OPEN/CLOSE to open the disc tray, and place
a recordable disc in the tray. Press
CLOSE again to close the tray.
5
Press  RECORD to start recording.
6
Press  STOP to stop recording.
Recording without 'Rec
Link'
1
Press SETUP to display the Setup menu.
Press  to select 'Recording', then press 
to enter the sub-menu.
Press  to select a recording mode, then
press ENTER.
Guide to Recording Options (p.97)
2
When completed, press SETUP to exit the
Setup menu.
3
Press SOURCE repeatedly to select 'DV' as
the signal source.
4
Press  to select 'Rec Link' button on
the screen, then press ENTER to switch off the
function.
After switching off the function, you can control your DV
either through the on-screen control pad using 
and ENTER buttons, or through the control keys on DV.
49
OPEN/