Setting The Showview System; Setting Tv Mode/Scart Bypass - LiteOn LVW-5025 Series User Manual

Setting the ShowView
System
The ShowView programming system is a
specially-designed feature for recording TV
programs. The system greatly simplifi es the timer
recording process, as it does not require users to
enter program information, such as date, channel
number and start/end time, which are all contained
in the ShowView programming numbers. You
can complete the timer recording setup simply by
inputting the ShowView number, which can be
found in most newspapers, TV listing magazines or
online sources.
Setting up the ShowView
System
As channel numbers may vary depending on
where you live, it is suggested that you build up
a matching channel list when you fi rst set up the
DVD recorder. This step will help you to make use
of the ShowView system for future timer recording
settings.
1
Press TV/MODE or press SOURCE to set
'TV' as the signal source.
By default, pressing TV/MODE allows you to switch to TV
directly. However, if you have activated the 'SCART Bypass'
mode earlier through Setup menu, you can only press
SOURCE to switch to TV.
If you press SOURCE, you may need to press the button
more than once to switch to 'TV'.
2
Press EDIT to display the Channel Editor
menu.
3
Press  to select a TV channel, then press
ENTER.
4
Press  to select 'GCN', then press
ENTER.
CH:01
CNN News
Animax
AXN Sports
Discovery
HBO
The dialogue box for entering GCN will appear.
5
Press or number buttons (0-9) to
enter the GCN (guide channel number), which
is the channel number used by the ShowView
system, then press ENTER.
6
To set GCN for other channels, repeat steps
3-5.
7
When completed, press  to select
'Exit', then press ENTER.
Setting TV MODE/SCART
Bypass
When the DVD recorder is switched on, you may
need to activate the 'TV MODE/SCART Bypass'
feature in order to successfully watch programs
imported via the SCART connection.
1
Press SETUP to display the Setup menu.
2
Press  to select 'TV Tuner', then press
ENTER.
TV MODE
3
Press  to select 'TV MODE', then press
ENTER.
TV MODE
26
Not Allowed
Bypass Allowed
Not Allowed
Not Allowed