Advertisement
3. Select the Adaptaplug that most
resembles the original plug and
insert it into the device to be
powered. The inside and outside
diameter must be the correct size
to ensure proper electrical contact.
If none of the supplied plugs fit,
additional Adaptaplugs are
available at your local RadioShack
store.±
+
"
056#..+0)
#0
To avoid damage to the device you are
using, make sure that the Adaptaplug is
installed correctly. If you have trouble
installing it, take the device to be
powered (with all its accessories) and
your adapter to your local RadioShack
store for assistance.
To use your adapter, your computer
must have a DC input jack and you
must determine the polarity of the jack.
This symbol means that
the inside contact, or TIP,
is negative (–).
This symbol means that
the inside contact, or TIP,
is positive (+).
"#
#2.7)
. . . .
±
±
"016'"
Some Dell models
require the special Dell
plug.
.
"%#76+10"
Install the Adaptaplug
before you connect the
adapter to an input
power source.
"
.
7
Advertisement
