KYMCO VITALITY 50 Manual page 179

12
. CARBURETOR
Install the throttle valve by aligning the
groove in the throttle valve with the throttle
stop screw.
Tighten the carburetor top.
After installation, perform the following
adjustments and inspections.
• Throttle cable free play ( 3-16)
• Idle speed adjustment ( 3-10)
CARBURETOR (2-STROKE)
REMOVAL
Remove the met-in box. ( 13-5)
Remove the center cover. ( 13-6)
Remove the air cleaner housing. ( 5-2)
Disconnect the fuel tube. ( 5-2)
Disconnect the auto bystarter wire
connector. ( 5-2)
Remove the carburetor top and throttle
valve from the carburetor. ( 12-5)
Loosen the drain bolt to drain fuel from the
carburetor.
Disconnect oil outlet tube from carburetor.
12-7
Groove
Carburetor Top
Drain Bolt
VITALITY 50
Oil Outlet Tube