KYMCO VITALITY 50 Manual page 139

9
. KICK STARTER/DRIVE PULLEY/
CLUTCH/DRIVEN PULLEY
Remove the drive belt from the clutch/
driven pulley.
DRIVE BELT INSTALLATION
Turn the driven pulley clockwise and lift it
up to expand the drive belt groove and then
install a new drive belt.
Set the drive belt on the drive pulley.
Install the drive pulley face, starting ratchet
and 12mm drive face nut, then tighten the
drive face nut.
Torque: 3.5 4.0kg-m
When installing the drive face nut, make
sure that the tooth spaces of the drive
pulley face and starting ratchet align
with the teeth of the crankshaft.
Clutch/Driven Pulley
Drive Belt
Drive Belt
Drive Face Nut Drive Pulley Face
Starting Ratchet
VITALITY 50
Drive Belt
9-8