Fiat 2016 500X Owner's Manual page 541

For further information, refer to "LaneSense Warning
(LDW)" in "Starting And Operating."
• LaneSense Strength — If Equipped
When this feature is selected, it sets the strength of the
steering wheel feedback for potential lane departures.
The amount of directional torque the steering system can
apply to the steering wheel to correct for vehicle lane
departure can be set at "Low," "Med" or "High." To
change the LaneSense Strength status, Press the "La-
neSense Strength" button and select from the "Low,"
"Medium" or "High" buttons.
For further information, refer to "Lane Departure Warn-
ing (LDW)" in "Starting And Operating."
• ParkSense — If Equipped
The ParkSense system will scan for objects behind the
vehicle when the transmission shift lever/gear selector is
in REVERSE and the vehicle speed is less than 11 mph (18
km/h). It will provide an alert (audible and/or visual) to
indicate the proximity to other objects. The system can be
enabled with Sound Only, or Sound and Display. To
change the ParkSense status, press and release the
"Sound Only" or "Sound & Display" button. Refer to
"ParkSense" in "Starting And Operating" for system
function and operating information.
Refer to "ParkSense Rear Park Assist" in "Starting And
Operating" for system function and operating informa-
tion.
• Front ParkSense Volume — If Equipped
Front Park Assist chime volume settings can be selected
from the EVIC or Uconnect System (if equipped). The
chime volume settings include "LOW," "MEDIUM," and
"HIGH." The factory default volume setting is MEDIUM.
I n f o r ma t i o n P r o v i d e d b y :
MULTIMEDIA 539
11