Fiat 2016 500X Owner's Manual page 527

• LaneSense Warning — If Equipped
When this feature is selected, it sets the distance at which
the steering wheel will provide feedback for potential
lane departures. The LDW sensitivity can be set to
provide either an "early," "medium," or "late" warning
zone start point.
For further information, refer to "LaneSense Warning
(LDW)" in "Starting and Operating."
• LaneSense Strength — If Equipped
When this feature is selected, it sets the strength of the
steering wheel feedback for potential lane departures.
The amount of directional torque the steering system can
apply to the steering wheel to correct for vehicle lane
departure can be set at "Low," "Medium" or "High."
For further information, refer to "Lane Departure Warn-
ing (LDW)" in "Starting and Operating."
• Blind Spot Alert — If Equipped
When this feature is selected, the Blind Spot Alert feature
can be set to Off, Lights or Lights and Chime. The Blind
Spot Alert feature can be activated in Lights mode. When
this mode is selected, the Blind Spot Monitor (BSM)
system is activated and will only show a visual alert in
the outside mirrors. When Lights & Chime mode is
activated, the Blind Spot Monitor (BSM) will show a
visual alert in the outside mirrors as well as an audible
alert when the turn signal is on. When Off is selected, the
Blind Spot Monitor (BSM) system is deactivated. To
change the Blind Spot Alert status, press the "Off,"
"Lights" or "Lights & Chime" button on the touchscreen.
Then press the back arrow button on the touchscreen.
I n f o r ma t i o n P r o v i d e d b y :
MULTIMEDIA 525
11