Drum Drive Assy/ Drum Phase Sensor Pcb Assy 1, 2 - Brother HL-4040CN, HL-4050CDN, HL-4070CDW Service Manual

8.48 Drum Drive ASSY/ Drum Phase Sensor PCB ASSY 1, 2

(1) Remove the Engine insulation sheet from the Harness shield plate, which is fixed with a
two-sided adhesive tape.
Harness shield plate
Engine insulation sheet
(2) Remove the three cup S M3x6 Taptite screws, and then remove the Harness shield plate
from the Frame unit.
Taptite, cup S M3x6
Harness shield plate
Taptite, cup S M3x6
Taptite, cup S M3x6
Fig. 3-144
Frame unit
<Left side>
Fig. 3-145
<Left side>
3-100 Confidential