Metabo Hammer Catalog page 21

OTHER ACCESSORIES
Integral chucks for rotary hammers
SDS-plus hammer chuck
For accessories with
SDS-plus shank end
(UHE 22, UHE 28 Multi,
BHE 26, BHE 26, KHE 26)
Quick-action keyless chuck
with adapter
For accessories with
cylindrical shank end
(UHE 22, UHE 28 Multi,
BHE 24, BHE 26,
KHE 26 Contact, KHE 28)
Geared chuck with adapter
For accessories with
cylindrical shank end
(for UHE 22, UHE 28 Multi,
BHE 24, BHE 26,
KHE 26 Contact, KHE 28)
SDS-plus hammer chuck KHE 32
For accessories with
SDS-plus shank end
(for KHE 32)
Quick-action keyless chuck
with adapter, KHE 32
For accessories with
cylindrical shank end
(for KHE 32)
Accessories
Code! Key
For protection of Metabo
machines (with CODE!
configuration) from misuse
The complete Metabo
tool park (with CODE!
NEW
configuration) can be
protected with a single
CODE! protected with key
Full-view safety goggles
Very comfortable full-view safety
goggles. Only light pressure
NEW
around the eye area, giving
a comfortable secure fit due
to the use of two compound
materials (hard and soft
components). The excellent
ventilation leaves the eye area
feeling pleasant and free from
irritation. Also suitable for
people who wear glasses.
UV protection 2-1, coating
on the lens: scratch-free
on the outside and mist-free
on the inside.
Replacement lens for
safety goggles 6.31075
Special grease for
tool shank end
For shank ends of hammer
drill bits, chisels, adapters,...;
prevents friction and wear
coefficient; bio-degradable
High anti-aging, high resistance
to heat, high anti-corrosion
properties
82 |
Dust extraction accessories
For all machines with 43 mm
collar diameter
Order
no.
6.31920
6.31921
6.31924
6.31922
6.31923
Order
no.
6.23127
6.31071
6.31159
6.31800
Order
no.
Extraction unit 6.31590
For work with
drill bits of Ø 4-20 mm;
with drilling depth
guide; to fasten the
extraction unit on
the collar of the
machines, one
requires the support
handle 6.31594
Extraction unit 6.31591
For work with
drill bits of
Ø 16-40 mm;
with drilling depth
guide; to fasten the
extraction unit on
the collar of the
machines, one
requires the support
handle 6.31594
Support handle for 6.31594
extraction units
For fitting the
extraction units
on the collar
of the machines
Suction hose 6.31592
Connector with
internal Ø 30 mm
and connector with
outer Ø 35 mm
Adapter 35/58 mm 6.30316
Connector 6.31593