Wolf L Series Built-In Ovens - Wolf L Series Installation Manual

Wolf L Series Built-In Ovens

L Series Oven Installation
IMPORTANT NOTE: This installation must be completed
by a qualified installer or Wolf authorized service center
technician.
Read this entire installation guide prior to installation and
save for the local inspector's reference. The homeowner
should keep this installation guide for future reference.
Any questions or problems regarding installation of the
L series oven should be directed to your authorized Wolf
dealer or Wolf Appliance, Inc. at 800-332-9513, or visit
our website at wolfappliance.com.
IMPORTANT NOTE: This appliance must be installed in
accordance with National Electrical Codes, as well as
all state, municipal and local codes. The correct voltage,
frequency and amperage must be supplied to the
appliance from a dedicated, grounded circuit which is
protected by a properly sized circuit breaker or time delay
fuse. The proper voltage, frequency, and amperage ratings
are listed on the product rating plate.
Record the model and serial numbers before installing
the L series oven. Both numbers are listed on the product
rating plate located below the control panel. The oven
door must be open to view the rating plate. Refer to the
illustration below.
RATING
PLATE
Location of rating plate.
Wolf L Series Oven
Model Number
Serial Number
wolfappliance.com/specs
3