ADDING / SUBTRACTING MEASUREMENTS
See Figure 6.
Take a measurement as described above.
Turn the laser Off. The measurement remains on the
screen.
Tap "+".
Take a second measurement. This measurement will be
added to the first.
To subtract a measurement, tap "-" before taking the
second measurement.
NOTE: Addition and subtraction functions can only be per-
formed from the same type of measurement. For exam-
ple, you cannot add a distance measurement to an area
measurement.
AREA MEASUREMENT
See Figure 7.
Select the Area icon.
Position the device to take a width measurement.
NOTE: The icon will flash to show which measurement
you are taking.
Turn the laser On. When the laser is turned Off, the mea-
surement appears.
Tap the green button to capture the measurement.
Position the device to take a length measurement.
Turn the laser On.
Tap the green button to capture the measurement.
The area measurement of the appears as ft
Area
Volume
VOLUME MEASUREMENT
See Figure 8.
Select the Volume icon.
Following the steps in Area Measurement, take measure-
ments of the height, length, and width of the area.
The measurement appears highlighted as ft
App images may vary.
OPERATION
Fig. 6
Fig. 7
or m
.
2
2
Fig. 8
or m
.
3
3
8 — English